Application: For concealed wiring in dry or wet locations For exposed wiring in dry or wet locations. For exposed and wiring in dry, locations where subjected to corrosive action if suitable for corrosive conditions encountered. For exposed wiring where subjected to the weather. For use in ventilated, Non-ventilated and ladder-type cable trays in dry or wet locations. For direct earth burial (with protection as required by inspection authority). For service entrance above or below ground.
Voltage: 1000V
Standard: CUL1569. CSA Standard C22.2 No. 131, No.38 and No.2256, RoHS
Suitable for open and concealed wiring in dry, damp, or wet locations, including underground installations. Approved for direct burial in accordance with CSA C22.1:24 (CEC) Rule 12-602 and Table 19. May be installed in cable troughs, ventilated flexible cableways, or embedded in masonry or concrete. Minimum recommended installation temperature: −40 °C (with suitable handling procedures). Maximum conductor temperature: 90 °C. Approved for use with ceiling fixtures.
Armoured cable for commercial, industrial, and multi-residential applications.
Standard: CSA Standard C22.2 No. 51-20
Voltage：600V
Working temperature: Rated at 90°C wet or dry
Performance: Flame test compliances: FT4
Conductor: Aluminum conductors (aluminum alloy 8000 series) with one bare grounding wire
Conductor: annealed bare copper wires, or compact aluminum 8000 series wires, class B.
Insulation: Heat and moisture resistant, low temperature Cross-Linked Polyethylene (XLPE)
Type RW90, -40°C to +90°C
Application: For open wiring and raceways (except cable troughs and ventilated flexible cableway) in dry or wet locations. For exposed wiring where exposed to weather with sunlight resistant insulation. Approved for use with ceiling fixtures
